● Hardness systems: Leeb (HL), Brinell (HB), Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Vickers (HV), and Shore (HS)

● Measuring range HLD (170~960), HRA (59~85), HRB (13~100), HRC (18~68), HB (19~655), HV (80~976), HS (32~100)

● Accuracy: +/- 5 HLD (0.63% at 800 HLD)

● Measuring direction 360 ° (vertically downward, obliquely downward, horizontally, obliquely upward, vertically upward)

● Measuring materials: steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper and forged steel

● Display TFT, 320 × 240 TFT LCD screen COLOUR DISPLAY Data storage 510 files, 46 to 215 groups (impact times 32 to 1) Communication interface standards USB2.0 (RS232, RS485)

● Charging power supply 5VDC220VAC

● Charging time 2-3hour

● Battery 7.4VLi2000mAhBattery

● Ambient temperature 040

● Storage temperature -2570

● The continuous working time is about 20 hours, and the standby time is 80 hours;

● Standard: ASTM A956, DIN 50156-1, GB/ T-17294

Functional features:

● Multiple language switching between Simplified/Traditional English, and German, with menu based operation.

● Adopt a proprietary dual bin dustproof design to ensure that the main engine bin is not affected by dust;

● Type-c USB and RS485 communication interfaces can easily connect PCs, industrial control computers, or PLCs;

● The main interface displays two hardness scales.

● There are three modes switching on the main interface (histogram mode, full hardness mode, and curve mode).

● The production batch number setting function allows for self-numbering of measured workpieces, facilitating statistical recording.

● Browse for any hardness scale conversion of status measurement data, which is convenient and fast.

● It can be equipped with 7 different impact devices, which do not require recalibration during replacement and can automatically identify the type of impact device.

● Support the measurement of multiple hardness systems and three strength values.

● Built-in domestic and foreign hardness conversion tables to meet the different needs of customers.

● It can store 510 files, with 46 to 215 groups of single measurement values, average values, measurement dates, impact directions, times, materials, hardness system, and other information for each file (32 to 1 impact times).

● The upper and lower limits of hardness values can be set in advance, and automatic alarm will be given when the limit is exceeded, facilitating the needs of users for batch testing.

● Indication software calibration function.

● Built-in high-performance lithium battery and charging control circuit, with a battery capacity of 2000mA.

● Computer software can be equipped to support data query, storage, statistics, histogram display, and other functions, and stored in Excel format.

Standard configuration:

● Instrument with Built in MINI Printer – 1

● D-type impact device – 1

● Small support ring – 1

● Nylon brush (I) – 1

● High value Leeb hardness block – 1

● Charger – 1

● Software (By Email)

Options:

● Various special-shaped impact devices.

Main technical indicators: Indication error and repeatability.

● D-Probe: – Model No. ITI-D

Universal standard unit. Will handle the majority of hardness testing applications.

● D+15 -Probe: – Model No. ITI-D+15

Very narrow contact area with a set back measurement coil. This device is used to measure hardness in grooves and recessed surfaces.

● DL -Probe: – Model No ITI-DL

This model features a needle front section with a diameter of 4mm and a length of 50mm. It is suitable for testing in extremely confined spaces, the base of grooves and on special components such as as gear wheels. For use on steel and cast steel only!

● DC-Probe: – Model No. ITI-DC

Very short impact device for those confined areas, i.e. inside bores for internal measurements. Conforms to the D measuring range.

● G-Probe: – Model No. ITI-G

This device has an enlarged test tip, and an increased impact energy range (approx. 9 times the D, 72 ft-lb.). Can be used on lower quality finishes for measuring hardness in the Brinell range only (max. 650 HB). Designed to be used with heavy components such as heavy castings and forgings.

● C-Probe: – Model No. ITI-C

A reduced impact energy impact device-width (approximately ¼ of the D Type 2 ft-lb.) for measuring the hardness of surface hardened components, coatings, thin wall or impact sensitive components. Applies a small superficial indentation.

● E-Probe: – Model: ITI-E

Diamond tip ensures longer operation life, for measurements in extreme hardness ranges. Tool steels with high carbide content.

Various special-shaped support rings

This set is designed to let the user confidently test on round (Concave or Convex) parts. Simple threaded design for quick change in the shop or out in the field.

12pc Universal Support Ring Set.